Copyright © 2016-2018 FIDO Alliance All Rights Reserved.
The fields in the Authenticator Metadata will be the primary method of communicating Authenticator Certification status and details about implementations to Relying Parties (RPs).
This section describes the status of this document at the time of its publication. Other documents may supersede this document. The most recent version of this document can be found on the FIDO Alliance Website at https://www.fidoalliance.org.
This document was published by the FIDO Alliance as a . If you wish to make comments regarding this document, please Contact Us. All comments are welcome.
Implementation of certain elements of this Requirements Document may require licenses under third party intellectual property rights, including without limitation, patent rights. The FIDO Alliance, Inc. and its Members and any other contributors to the Requirements Document are not, and shall not be held, responsible in any manner for identifying or failing to identify any or all such third party intellectual property rights.
THIS FIDO ALLIANCE REQUIREMENTS DOCUMENT IS PROVIDED “AS IS” AND WITHOUT ANY WARRANTY OF ANY KIND, INCLUDING, WITHOUT LIMITATION, ANY EXPRESS OR IMPLIED WARRANTY OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” in this document are to be interpreted as described in [RFC2119].
This document reflects the Metadata Requirements for Authenticator Certification.
Mandatory fields are required to be evaluated by the FIDO Security Secretariat (Level 1), or the FIDO Accredited Security Laboratory (Level 2+) and submitted to FIDO as part of the Certification Request. Submitted metadata will be verified to be an accurate representation of the implementation.
Submission of Metadata to the FIDO Metadata Service (MDS) is optional, and can be done after recieving FIDO Authenticator Certification. If Metadata is submitted to MDS, the elements marked herin as Mandatory must be submitted and must match the Metadata submitted to FIDO during Authenticator Certification.
The following Functional Metadata Fields are Mandatory for Authenticator Certification.
|VerificationMethodDescriptor||3.4||A descriptor for a specific base user verification method as implemented by the authenticator. A base user verification method must be chosen from the list of those described in [FIDORegistry].|
|verificationMethodANDCombination||3.5||VerificationMethodANDCombinations must be non-empty. It is a list containing the base user verification methods which must be passed as part of a successful user verification.|
|AAID||4.1||The Authenticator Attestation ID. See [UAFProtocol] for the definition of the AAID structure. This field must be set if the authenticator implements FIDO UAF.|
|AAGUID||4.1||The Authenticator Attestation GUID. See [FIDOKeyAttestation] for the definition of the AAGUID structure. This field must be set if the authenticator implements FIDO 2.0.|
|attestationCertificateKeyIdentifiers||4.1||A list of the attestation certificate public key identifiers encoded as hex string. This value must be calculated according to method 1 for computing the keyIdentifier as defined in [RFC5280] section 18.104.22.168. The hex string must not contain any non-hex characters (e.g. spaces). All hex letters must be lower case. This field must be set if neither AAID nor AAGUID are set. Setting this field implies that the attestation certificate(s) are dedicated to a single authenticator model.|
|description||4.1||A human-readable short description of the Authenticator.|
|authenticatorVersion||4.1||Earliest (i.e. lowest) trustworthy authenticatorVersion meeting the requirements specified in this metadata statement. Adding new StatusReport entries with status
|protocolFamily||4.1||The FIDO protocol family. The values "uaf", "u2f", and "fido2" are supported. If this field is missing, the assumed protocol family is "uaf".|
|upv||4.1||The FIDO unified protocol version(s) (related to the specific protocol family) supported by this authenticator. See [UAFProtocol] for the definition of the Version structure.|
|userVerificationDetails||4.1||A list of alternative VerificationMethodANDCombinations. Each of these entries is one alternative user verification method. Each of these alternative user verification methods might itself be an "AND" combination of multiple modalities. All effectively available alternative user verification methods must be properly specified here. A user verification method is considered effectively available if this method can be used to either: 1) enroll new verification reference data to one of the user verification methods, or 2) unlock the UAuth key directly after successful user verification.|
|attachmentHint||4.1||A 32-bit number representing the bit fields defined by the
|isSecondFactorOnly||4.1||Indicates if the authenticator is designed to be used only as a second factor, i.e. requiring some other authentication method as a first factor (e.g. username+password).|
|tcDisplay||4.1||A 16-bit number representing a combination of the bit flags defined by the
|tcDisplayContentType||4.1||Supported MIME content type [RFC2049] for the transaction confirmation display, such as text/plain or image/png. This value must be present if transaction confirmation is supported, i.e. tcDisplay is non-zero.|
The following Security-related Metadata Fields are Mandatory for Authenticator Certification.
|CodeAccuracyDescriptor||3.1||The CodeAccuracyDescriptor describes the relevant accuracy/complexity aspects of passcode user verification methods.|
|PatternAccuracyDescriptor||3.3||The PatternAccuracyDescriptor describes relevant accuracy/complexity aspects in the case that a pattern is used as the user verification method.|
|EcdaaTrustAnchor||3.8||In the case of ECDAA attestation, the ECDAA-Issuer's trust anchor must be specified in this field.|
|attestationRootCertificate||3.8||In the case of ECDAA attestation, the ECDAA-Issuer's trust anchor must be specified in this field.|
|assertionScheme||4.1||The assertion scheme supported by the authenticator. Must be set to one of the enumerated strings defined in the FIDO UAF Registry of Predefined Values [UAFRegistry].|
|authenticationAlgorithm||4.1||The authentication algorithm supported by the authenticator. Must be set to one of the ALG_ constants defined in the FIDO Registry of Predefined Values [FIDORegistry]. This value must be non-zero.|
|publicKeyAlgAndEncoding||4.1||The public key format used by the authenticator during registration operations. Must be set to one of the ALG_KEY constants defined in the FIDO Registry of Predefined Values [FIDORegistry]. Because this information is not present in APIs related to authenticator discovery or policy, a FIDO server must be prepared to accept and process any and all key representations defined for any public key algorithm it supports. This value must be non-zero.|
|attestationTypes||4.1||The supported attestation type(s). (e.g.
|keyProtection||4.1||A 16-bit number representing the bit fields defined by the
|matcherProtection||4.1||A 16-bit number representing the bit fields defined by the
|isKeyRestricted||2.16||This entry is set to
|isFreshUserVerificationRequired||This entry is set to
Providing the biometry related Metadata Statement field (i.e. BiometricAccuracyDescriptor) [FIDOMetadataStatement] is not mandatory for passing FIDO Authenticator Certification.
SRWG recommends the use of the Status Dictionary to report the issue dates of Certifications within the array of status report entries. Default status to as “not FIDO Certified” and status is updated to include Certifications as they are achieved. Each Certification would have a separate entry.
SRWG recommends the following fields to be added to MDS, and that they become Mandatory for Security Certification.
|certificationDescriptor (in StatusReport)||Describes the externally visible aspects of the Security Certification evaluation.|
|certificateNumber (in StatusReport)||The Authenticator certificate number. This is a unique per-Security Certified implementation identifier.|
|certificationRequirementsVersion (in Status Report)||The Document Version of the Authenticator Security Requirements (DV) [FIDOAuthenticatorSecurityRequirements] the implementation is certified to, e.g. "1.2.0".|
|cryptoStrength (in Metadata Statement)||A claimed level of the overall cryptographic security, intended to give a Relying Party
or consumer some insight into the level of cryptographic security supported by
the Authenticator. Each key used by the Authenticator has a specified
Cryptographic Strength, and the
If this field is absent it indicates an unknown claimed overall cryptographic strength. For L2+ certified Authenticators the claimed overall cryptographic strength MUST be known and specified.
|operatingEnv (in Metadata Statement)||A description of the particular operating environment that is used for the Authenticator. These are specified in [FIDORestrictedOperatingEnv].|